There you are, about to make an important call when your iPhone suddenly flashes the dreaded “Call Failed” message. Your heart sinks, and frustration kicks in. What went wrong?

Why Does My iPhone Say Call Failed?

When your iPhone keeps showing a “Call Failed” message, it usually means the device couldn’t maintain a connection with the cellular network. This could be due to a wide range of issues—from a weak signal to iOS glitches.

Common reasons why your iPhone says “Call Failed”:

• Signal dropped.
• Network congestion.
• Problem with cellular network.
• SIM card issues.
• Problem with the Phone app.
• Carrier-related problems.
• iOS glitch.
• Do Not Disturb or Focus mode blocking calls.
• Wi-Fi Calling interfering with your cellular connection.

How to fix “Call Failed” on iPhone

If you’re trying unsuccessfully to place a call, here are the most common ways to fix the call failed error on an iPhone:

Try your call again

The first thing you should do when you encounter “Call Failed” error on your iPhone is to try making the call again. Often, a call will fail thanks to a temporary signal drop, and the call will work just fine a minute later. Before you do anything else, tap the dial button to redial your last number.

Close All Of Your Apps

It’s possible the call failed on your iPhone because of a glitch with the Phone app. Closing and reopening the app can fix a minor software glitch. We recommend closing all of your apps, just in case a different apps has crashed in the background.

1. Open the app switcher by double-pressing the Home button (iPhones without Face ID) or swiping up from the very bottom of the center of the screen (iPhones with Face ID).
2. Swipe your apps up and off the top of the screen.

Open the Phone app again and try making a call. If the call still fails, move onto the next step.

Check Your Blocked Contacts

Go to Settings > Apps > Phone > Blocked Contacts and scroll through the list to make sure the person you’re trying to call isn’t on it. On iOS 26, you can also find this list under Settings > Privacy & Security > Blocked Contacts.

It’s surprisingly easy to block a number by accident — a wrong swipe in the Recents tab is all it takes, and you’d never know unless you checked. If the number is on the blocked list, swipe left on it and tap Unblock. While you’re in the Phone settings, also check two other settings that can silently block calls. Go to Settings > Apps > Phone > Call Forwarding and make sure it’s turned off — if your calls are being forwarded to a number that can’t be reached, every outgoing attempt will look like it failed. And go to Settings > Apps > Phone > Silence Unknown Callers and turn it off if you’re not receiving incoming calls from numbers that aren’t in your contacts.

Turn Airplane Mode On And Off

One of the most common reasons a call fails on your iPhone is because of a glitch with your cellular connection. You can fix this by turning Airplane mode on and off.

1. Go to Settings.
2. Turn on Airplane Mode.
3. Wait five seconds.
4. Turn off Airplane Mode.

Check Do Not Disturb And Focus Mode

Go to Settings > Focus > Do Not Disturb and make sure it’s turned off. If you have other Focus modes set up (like Work or Sleep), check those too — any active Focus mode can block incoming calls without giving you any visible warning.

Do Not Disturb won’t stop you from placing outgoing calls, but it can prevent incoming calls from ringing through, which makes it look like calls are failing on both ends. The person calling you gets sent straight to voicemail, and neither of you sees a missed call notification (which is especially confusing). If you travel between time zones or have old Focus schedules you forgot about, a mode might be activating at unexpected times without you realizing it.

Try moving your location

It’s possible that you’re in a location that has poor service — good enough that your phone thinks it has cellular service, and you’ll see a bar or two of signal strength at the top of your phone — but bad enough that it can’t actually complete a connection. Try to make a call in another location. If you’re indoors, go outside, or otherwise try to change your location and make a call.

Restart your iPhone

The next step you can take if your iPhone call failed is to restart your device. Restarting your iPhone can fix a variety of small issues by allowing of its programs to shut down naturally. Simply turn your iPhone off, wait a minute, and then turn it back on again.

If a regular restart doesn’t help, try a force restart instead. On iPhones with Face ID, press and quickly release the Volume Up button, press and quickly release the Volume Down button, then press and hold the Side button until the Apple logo appears. A force restart clears out deeper system-level processes that a normal restart leaves running — it’s the same phone, but it’s a harder reset of the software stack.

Turn Off Wi-Fi Calling

Go to Settings > Apps > Phone > Wi-Fi Calling and turn off Wi-Fi Calling on This iPhone.

Wi-Fi Calling is supposed to let you make calls over a Wi-Fi network when your cellular signal is weak, but it can actually cause call failures when the handoff between Wi-Fi and cellular doesn’t go smoothly. This is one of those fixes that comes up over and over again in Apple’s support forums — people spend hours troubleshooting airplane mode and SIM resets, and then turning off Wi-Fi Calling is what finally fixes it. If your calls start working after you turn it off, you can try re-enabling it later to see if the problem was temporary. But some carriers and router configurations just don’t play well with Wi-Fi Calling, and leaving it off permanently is a perfectly fine option.

Check For A Carrier Settings Update

Carrier settings updates can help improve the connection between your iPhone and wireless carrier’s network. It’s a good idea to immediately update the carrier settings when an update becomes available.

You’ll typically receive a pop-up on your iPhone when a carrier settings update is available. Tap Update if you see that notification.

You can manually check for a carrier settings update by connecting your device to the internet and following these steps:

1. Go to Settings.
2. Tap General.
3. Tap About.
4. A pop-up will appear if a carrier settings update is available. Tap Update if it does.

If no pop-up appears, move onto the next step.

Check For An iOS Update

Apple routinely releases iOS updates to fix known bugs and occasionally introduce new features. We recommend installing new iOS updates and see if that will fix your problem.

1. Go to Settings.
2. Tap General.
3. Tap Software Update.
4. Tap Update Now if an update is available.

Eject And Reinsert The SIM Card

If your iPhone has a physical SIM card, there’s a chance that there’s a problem with the way the SIM card is seated in its tray, and the phone can have trouble reading all the contacts on the card. Ejecting and reseating the SIM card can help fix this problem.

As long as you are careful, it’s not hard to eject the SIM card from your iPhone. Switch off your phone first. Then, use the SIM ejector tool to push into the hole beside the SIM tray to release it. Take out the SIM card and check for damages before putting it back in properly.

If you have an iPhone 14 or newer purchased in the United States, your phone uses an eSIM instead of a physical SIM card — there’s no tray to eject. If you’re having call failures on an eSIM model and nothing else has worked, you can try removing and re-adding the eSIM by going to Settings > Cellular, tapping your eSIM, and selecting Delete eSIM. Then tap Add eSIM to set it up again. Make sure you have your carrier’s activation information handy before you do this, because you’ll need it to re-add the eSIM.

Reset your network settings

If you’ve tried everything else and your iPhone can’t complete any phone calls due to the Call Failed error, we recommend that you reset your phone’s network settings.

Save this as a last resort, because this troubleshooting step will erase all your network settings. This means you’ll have to reenter your Wi-Fi passwords and reconfigure any virtual private networks on your iPhone. It’s a little bit of an inconvenience, but it can fix the problem when calls fail on your iPhone.

1. Go to Settings.
2. Tap General.
3. Tap Transfer or Reset iPhone.
4. Tap Reset.
5. In the pop-up menu, select Reset Network Settings.
6. Enter your iPhone’s Passcode.
7. Select Reset Network Settings to confirm your decision.

Contact your carrier

If resetting network settings didn’t work, it’s time to contact your wireless carrier for assistance. Since calls are failing, you might need to visit the carrier’s store. There might be an issue with your account only a customer support representative can resolve.

Before you go, check your carrier’s website or app (like the My Verizon or myAT&T app) for any service outages in your area. If there’s a known outage, there’s nothing wrong with your phone — you just have to wait it out. If there’s no outage, the carrier can check whether your account has a billing-related block, whether your line needs to be re-provisioned, or whether there’s an error on their system tied to your number. These are things you can’t fix from your iPhone’s settings no matter how many resets you try.

iPhone Call Failed Problem: Fixed!

If none of the troubleshooting steps above solved the call failed error on your iPhone, your next step should be to contact Apple Support. You can reach them through the Apple Support app, online at support.apple.com, or by scheduling an appointment at your nearest Apple Store. There’s a small chance the issue is hardware-related — a damaged antenna or a failing modem chip can cause persistent call failures that no software fix will touch.

As a last resort before contacting Apple, you can try a factory reset by going to Settings > General > Transfer or Reset iPhone > Erase All Content and Settings. Back up your iPhone first, because this wipes everything. It’s a drastic step, but if the problem is a deep iOS corruption that survived a network settings reset, a full erase and restore can clear it.

You’ve fixed the problem and your iPhone calls aren’t failing anymore. Share this article on social media to teach your friends and family what to do if calls fail on their iPhone. Leave a comment below to let us know which fix worked for you!

The post Call failed on iPhone? Here’s the fix appeared first on nerdsmodo.

So, why do apps keep crashing on iPhone? There are many reasons why your iPhone apps may be crashing. Because of this, there is no one-size-fits-all solution for fixing crashing iPhone apps. However, with a bit of troubleshooting, you’ll be able to get back to your favorite apps and games in no time. Let’s look at the solutions you can apply when an app keeps crashing on your iPhone.

How to Fix an App That Keeps Crashing on iPhone

1. Check Your Internet Connection

If your app requires an internet connection to function, poor Wi-Fi or hotspot connection may cause the app to crash on your iPhone repeatedly. You can test whether your internet is functional with a simple Google search on the Safari app and loading some web pages. To solve internet connection problems on your iPhone, try restarting your router, connecting to a different Wi-Fi network, or applying these solutions if your iPhone is not connecting to wi-fi.

2. Charge Your iPhone

If your iPhone’s battery is running low, plug it in to charge before launching the app again. A low charge can cause your device to struggle with power-hungry apps, leading to abrupt crashes.

If you’re playing a multiplayer game with high-quality graphics, yet there’s only a battery level of 10 percent left on your iPhone, your app might close abruptly because your device is struggling to provide enough power to support it.

Heavy usage of your iPhone while charging will likely result in overheating. This might cause your iPhone to lag and close apps. It’s also bad practice if you want to maintain your iPhone’s battery health.

3. Close and Relaunch the App

Swipe up from the bottom of the screen to launch the App Switcher, swipe left or right to find the crashing app, and swipe up to close it. Then, head to your Home Screen to relaunch the app.

Even if an app closes abruptly on your iPhone, it may still be open in the background, albeit unresponsive. When you re-open the app from the App Switcher, it may only display a blank screen and crash once more. Exiting the app completely before relaunching it clears that stuck state.

4. Update the App

Developers often release app updates to fix bugs and patch other performance issues. When your apps keep crashing on your iPhone, updating them may just be the trick to solving the problem. Go to the App Store and search for the app that keeps crashing. If an update is available, you’ll see an Update button instead of the usual Open button. Tap Update to install the latest version. If multiple apps keeps crashing on your iPhone, tap your profile icon at the top right corner of the screen, then tap update all.

5. Update Your iPhone

Another possible reason why your iPhone apps keep crashing is that your iPhone software may be out of date. This is especially true if a native iOS app is crashing. Updating your iPhone’s software can resolve compatibility issues that cause apps to crash. Go to Settings > General > Software Update to see if an update is available for your device. If there is a pending update, tap Update Now and follow the onscreen instructions.

6. Restart Your iPhone

Press and hold the side button and either volume button until Slide To Power Off appears. Drag the slider from left to right to turn off your iPhone. Wait 15 seconds or so, until your iPhone has shut all the way off, and then turn your iPhone back on by holding the side button down until the Apple logo appears on the screen. Try opening the app once your iPhone has fully restarted.

7. Remove and Reinstall the App

If only one or two of your iPhone apps keep crashing, reinstalling the problematic apps will fix the problem. Find the app’s icon on the Home Screen or App Library, then press and hold it until the menu appears. Tap Remove App > Delete App > Delete to uninstall the app from your iPhone. To reinstall, open the App Store app and search for the application you just deleted. Once you’ve found it, tap the Cloud icon to the right of its name. The app will then be reinstalled on your iPhone and appear on the Home Screen. Open the app and check if the problem is fixed.

8. Check Your iPhone’s Storage

Low storage space may affect your iPhone’s performance and cause your apps to keep crashing. If your iPhone storage is nearly full, it’s best to start creating free space on iOS. Go to Settings > General > iPhone Storage to check the available space on your iPhone. You’ll see an overview of the apps taking up the most storage. If you spot any apps you don’t use, remove them to free up space.

9. Reset All Settings

if apps still keep crashing on your iPhone, go to Settings > General, scroll all the way to the bottom of the page, and tap Transfer or Reset iPhone. Select Reset and choose Reset All Settings. This restores all your iPhone’s settings to their default state without deleting your data.

Your iPhone won’t delete any data as long as you don’t accidentally choose Erase All Content and Settings.

10. Check if an App Update Is in Development

Visit the app’s official website or social media pages to see if the developers have acknowledged the issue. Developers may announce that they are aware of the problem and are working on a hotfix or update to fix it.

This way, you will know whether or not the developers plan to fix the crashing issue in a future update. And if they are, all you need to do is wait for its release. An iPhone app that keeps crashing for many users is no small issue, so developers tend to prioritize these fixes.

11. Provide Feedback to the App Developer

If you didn’t spot any announcements, provide feedback to the developers via email or other designated channels. Sometimes, only users of a particular platform or device will experience frequent app crashes, and developers may be unaware of the extent of the issue, especially if it’s an indie app with a smaller customer base.

While it’s understandably frustrating that your iPhone app keeps crashing when you want to use it, be polite and constructive in your feedback. Remember that app developers are people, too!

12. Replace With a Similar App

Head to the App Store to find and install another app that serves the same purpose as a replacement. If you notice that the latest version history of the crashing app was a year or two ago and its social media hasn’t been updated in ages, chances are that the developers are no longer active and won’t be releasing a fix.

Get Your iPhone Apps Working Again

If you’ve had a headache over wondering why your apps keep crashing on your iPhone, we hope our list of fixes has helped you resolve the problem.

Focus on finding out if it’s an app-specific issue or whether the root cause is your iPhone. It’s always worth keeping things up-to-date on your iPhone to enjoy the latest features and ensure app compatibility.

If you have tried all the above solutions, the issue may be the app itself when it keeps closing. Although this is beyond your control, it’s good to inform the app Developer about the problem you are having.

The post Apps Keep Crashing on Your iPhone? Here’s the Fix appeared first on nerdsmodo.

If Apple CarPlay is not working with your iPhone, you are not alone. Multiple iPhone users are reporting problems with CarPlay functionality, based on complaints on Reddit and elsewhere.

The most widespread CarPlay issues appear to be related to connectivity. Multiple users have said that they are not able to connect their iPhone to CarPlay. Other users have said that CarPlay keeps disconnecting after it is connected. Other people have stated that their iPhone is not being detected by CarPlay.

These problems have been reported across numerous vehicle models including the 2025 Honda Civic Hybrid, 2025 Mazda CX-30, various 2024 Honda models, multiple Volkswagen vehicles, the 2023 Audi S3, and the 2023 Nissan Frontier.

Meanwhile, several iPhone users have complained that CarPlay completely fails to launch, requiring multiple reconnection attempts – sometimes up to five tries – before the system will work. Others report broken Siri audio functionality that persists despite restarting both their iPhones and vehicles.

In addition, some iPhone users have said that CarPlay freezes and shows a black screen. When this happens, CarPlay doesn’t display the currently playing song information on their car’s instrument panel. Lastly, several users have reported CarPlay sound problem.

Whatever the issue — can’t connect your iPhone to a car with CarPlay, your CarPlay apps aren’t opening, or your phone is charging but CarPlay isn’t working—we can help.

Here’s what to do when Apple CarPlay isn’t working on your iPhone.

Warning: Don’t try fixing CarPlay while driving. Pull over so that you can safely solve the issue without being distracted while driving.

How to fix CarPlay not working on iPhone

Check That Your Car and Region Support CarPlay

Go to Apple’s CarPlay compatibility page and confirm that your vehicle is listed as a supported model. If you can’t find your car on the list, contact the vehicle manufacturer directly to ask about CarPlay support.

This sounds like an obvious first step, but it catches more people than you’d think. CarPlay isn’t available in every country and region, and not every car that has a USB port or Bluetooth actually supports it. Some older vehicles have infotainment systems that look like they should work with CarPlay but were manufactured before the feature existed for that model year. You can check Apple’s feature availability page to make sure CarPlay is supported where you live.

Make Sure CarPlay Is Enabled on your iPhone

If you can’t get Apple CarPlay started in your vehicle, it might be because the feature has not yet been enabled on your iPhone. To check if CarPlay is enabled on your iPhone, choose Settings > General > CarPlay and select your vehicle, then make sure “Allow CarPlay While Locked” is enabled. This will prevent CarPlay from disengaging when your iPhone locks.

If your iPhone isn’t detected by CarPlay, make sure that CarPlay isn’t restricted. Choose Settings > Screen Time > Content & Privacy Restrictions. If Content & Privacy Restrictions is on, tap Allowed Apps & Features, and make sure that CarPlay is enabled.

Make sure Siri is on

CarPlay depends on Siri to work, so you must make sure Siri is enabled on your iPhone. To do this, press and hold the Side button (the same one you use to lock or wake your device) until you see the Siri symbol appear at the bottom of the screen.

If you’re asked to enable or set up Siri, follow the instructions. Alternatively, choose Settings > Apple Intelligence & Siri > Talk & Type to Siri and tap “Siri” or “Hey Siri.” On top of this, make sure that Siri can be accessed when your device is locked. To do this, enable the “Allow Siri When Locked” toggle.

Check Airplane Mode, Bluetooth and VPNs

This mostly apply if wireless CarPlay is not working on your iPhone, but it’s worth a shot even if wired CarPlay is not working.

On your iPhone, choose Settings and make sure that Airplane Mode is turned off. Still in Settings, tap Wi-Fi and make sure that Wi-Fi is turned on. Tap the CarPlay network, and check that Auto-Join is turned on. Finally, tap Bluetooth and make sure that Bluetooth is also turned on.

If your iPhone can’t connect to your car with CarPlay and shows an error that says, “connection failed. Please check the bluetooth and wifi settings on your mobile device,” toggle Bluetooth and Wi-Fi off and on.

Lastly, a VPN connection can interfere with CarPlay, so consider disabling your VPN using your VPN provider’s app if you’re having trouble (a VPN can even interfere with wired connections).

If you use Focus modes on your iPhone, check those too. Go to Settings > Focus and look at any active profiles, particularly the Driving Focus. Some Focus settings can block app notifications or interfere with how CarPlay communicates with your iPhone, and a few users on Reddit have reported that turning off a custom Focus profile (not the built-in Driving one, but personal or work profiles that were active) fixed random CarPlay disconnects they couldn’t explain otherwise.

Wired CarPlay? Disconnect and Reconnect

Some iPhone users have reported that CarPlay disappears for no reason. Other users have reported that CarPlay doesn’t initialize. One way to solve these problems is to force your car to start CarPlay again. Simply disconnect the USB cable from your iPhone and reconnect it. It’s also worth trying connecting to a different USB port if you have one.

Not all USB ports in your car are created equal. Some ports are for charging only and won’t carry the data that CarPlay needs to work. Look for a USB port with a smartphone icon, a CarPlay logo, or a white outline around it — those typically support data transfer. Your car’s owner’s manual should tell you which port to use. If you’ve been plugging into the center console and it’s not working, try the one near the dashboard or glove box instead.

The cable itself matters more than most people realize, too. A cheap USB-C cable that charges your phone at home might not support data transfer at all — you need an MFi-certified cable (look for “Made for iPhone” on the packaging) or the original cable that came in the box with your iPhone. This one issue — using a cable that only carries power, not data — has been the root cause in a staggering number of Apple Community and Reddit threads. It’s also worth inspecting both the cable ends and the USB port in your car for lint, dust, or corrosion. A tiny piece of pocket lint jammed into your iPhone’s USB-C port can block the data pins while still allowing enough contact for charging.

Wireless CarPlay? Restart Wi-Fi Connection

Some iPhone users have said that wireless CarPlay doesn’t work because the iPhone and car can’t maintain a steady Wi-Fi connection. One simple fix for this problem is to forget the CarPlay Wi-Fi network and set it up again.

To do this, go to Settings > Wi-Fi, tap on the information button (the i icon) next to the CarPlay network, and select Forget This Network. Restart your iPhone, and then reconnect to the CarPlay network by following your car manufacturer’s instructions.

Restart Your iPhone and Your Car’s Infotainment System

Sometimes software glitches can cause CarPlay to malfunction. Restarting both your iPhone and your car’s infotainment system could help reset things and get CarPlay working again. Simply turn your iPhone off and back on. Then, restart your car’s stereo system using the manufacturer’s recommended method.

If a standard restart doesn’t do it, try a force restart on your iPhone instead. Press and quickly release the Volume Up button, press and quickly release the Volume Down button, then press and hold the Side button until the Apple logo shows up. This is different from a normal power-off — it clears temporary memory and resets background processes at a deeper level, which can fix CarPlay handshake failures that survive a regular reboot.

Force Quit the CarPlay App

When an app freezes or malfunctions, force closing it and reopening it again often fixes the issue. If a specific CarPlay app (like Maps, Music, or Podcasts) is giving you trouble, you can force quit it and then reopen it.

To close an app on your iPhone, open the app switcher by swiping up from the very bottom of the center of the screen (on iPhones with Face ID) or double-pressing the Home button (on iPhones with Touch ID). Swipe up on the app you want to close. You can now launch the app and try again. Crashed apps can cause all sorts of issues, from wonky behavior to black unresponsive screens.

Update iOS (and Maybe Your Car)

Updating your iPhone can help in a myriad of ways, from adding new features to fixing pesky bugs. If you’re experiencing regular problems with CarPlay on your iPhone, make sure that your phone has been updated to the latest version of iOS for the best results. You can do this under Settings > General > Software Update.

On top of this, many cars now receive over-the-air software updates. These updates add new features and fix old issues, even those associated with CarPlay. If you have a modern vehicle, try updating it using the relevant menu to see if it fixes your CarPlay problems.

If your car doesn’t do over-the-air updates (and many still don’t), you may need to visit your dealership to get the latest infotainment firmware installed. This is especially true for older vehicles where the head unit’s software hasn’t been updated to work properly with newer iPhones and recent versions of iOS. Several users on Apple Community forums have reported that a dealer firmware update — one that took the service department about 15 minutes to apply — completely solved CarPlay issues that no amount of iPhone-side troubleshooting could fix.

Check Wired Accessories Settings

If you’re using wired CarPlay and your iPhone keeps asking you to unlock it before CarPlay will connect, the Wired Accessories setting might be the cause. Go to Settings > Privacy & Security, scroll down, and tap Wired Accessories. If it’s set to Automatically Allow When Unlocked (which is the default), your iPhone blocks all USB data connections — including CarPlay — whenever the phone is locked.

Change the setting to Always Allow if you want CarPlay to connect without unlocking your phone every time. The other options are Always Ask and Ask for New Accessories, but both of those will interrupt CarPlay too. This setting exists to protect against data theft through public USB charging stations, which is a real concern at airports and train stations — but your own car’s USB port is a trusted connection, not some random kiosk. If you regularly drive for a couple of hours without unlocking your iPhone mid-trip, this one setting can be the reason CarPlay drops out or refuses to start, and changing it to Always Allow fixes it immediately.

“Forget” Your Car in CarPlay Settings

If your iPhone is still not working with CarPlay, you should forget your car and CarPlay settings, then set it up from scratch. This worked for me, so give it a try. Follow these steps:

• On your car stereo, go to Settings and delete ALL phones listed in Bluetooth settings.
• On your iPhone, Go to Settings > Bluetooth and forget any car stereos listed under My Devices.
• On your iPhone, go to Settings > General > CarPlay and forget any car listed there.
• Restart your iPhone AND your car stereo by turning them off and back on.
• Set up CarPlay again:
  • If your car supports CarPlay using the USB port, plug your iPhone into the USB port of your car or stereo. The USB port might be labeled with a CarPlay icon or a smartphone icon.
  • If your car supports wireless CarPlay, press and hold the voice command button on your steering wheel to set up CarPlay. Or make sure that your car is in wireless or Bluetooth pairing mode. Then on your iPhone, go to Settings > General > CarPlay > Available Cars and choose your car. Check the manual that came with your car for more information.

When you’re deleting old pairings from the car’s Bluetooth settings, make sure you remove every phone that’s listed — not just yours. Cars can store a limited number of paired devices (often around 6 to 8, depending on the model), and having too many old phones sitting in that list can prevent new connections from sticking. If you share the car with a partner or family member, their old device entries could be part of the problem.

If forgetting and re-pairing doesn’t work, one other thing to try before giving up on this step is renaming your iPhone. Go to Settings > General > About and tap the Name field at the top to change it. Some car infotainment systems get confused when a new iPhone has the same name as a previously paired device, and changing the name forces the car to treat it as a completely different phone. It’s a weird fix, but Apple Support has recommended it directly to users, and it works more often than you’d expect.

Reset Network Settings

Go to Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings. Your iPhone will restart, and once it’s back on, try connecting to CarPlay again.

Save this troubleshooting step for later in the process, because when you reset your network settings, all saved Wi-Fi passwords are erased along with your Bluetooth pairings, VPN configurations, and cellular settings. You’ll need to re-enter Wi-Fi passwords for every network you use — home, work, coffee shops, all of them. It’s a bit of a pain to set everything back up, but this step clears out corrupted network profiles and broken Bluetooth handshake data that can silently prevent CarPlay from connecting. For wireless CarPlay problems in particular, this is one of the most effective fixes you can try. If you’ve worked through everything else in this article and CarPlay still won’t cooperate, resetting network settings is the step that finally unsticks things for a lot of people.

Fix CarPlay Issues on Your iPhone With Minimal Fuss

It’s frustrating if your iPhone is not working with Apple CarPlay, as being unable to use your phone responsibly on the road can be very limiting. But with the troubleshooting tips above, you can get rid of the issues preventing your iPhone from working with CarPlay and get back to listening to tunes, navigating your journey, or getting in touch with loved ones safely and conveniently.

If you’ve gone through every step in this article and CarPlay still isn’t working, the problem might not be on your iPhone’s end at all. Contact your car’s manufacturer or visit the dealership first — infotainment firmware updates are free in most cases and fix the majority of persistent CarPlay failures that software troubleshooting on the phone can’t touch. If the dealership confirms your car’s firmware is up to date and the problem continues, then reach out to Apple Support directly or visit an Apple Store. In some rare cases, the issue can be a faulty USB-C port on the iPhone itself, and that’s something only Apple’s diagnostics can confirm.

The post Apple CarPlay not working on iPhone? Here’s the fix appeared first on nerdsmodo.

Various factors can prevent you from establishing a connection to the VPN server, ranging from unstable internet connection to technical difficulties with the VPN provider. Fortunately, you can try the troubleshooting steps below to get it resolved quickly.

How to fix iPhone not connecting to VPN issue

1. Perform Some Preliminary Checks

To begin troubleshooting, perform the following preliminary checks, which may resolve the problem right away:

1. Force quit your VPN app, then reopen it. If your iPhone has a Home button, double-press it to open the app switcher. If your iPhone doesn’t have a Home button, swipe up from the very bottom of the screen to the middle of the screen. Once the app switcher is open, swipe the VPN app up and off the top of the screen. Also, close any other apps that could interfere with the VPN connection.
2. Restart your iPhone to fix a minor software problem or connectivity issue with your VPN.
3. Ensure that your iPhone is connected to the internet.
4. Run a ping test to check the stability of your network connection. If the ping rate is too high or you get errors during the test, your internet likely isn’t stable.
5. Keep only one VPN app open at a time.
6. Check for a VPN app update.

While you’re checking for app updates, go to Settings > General > Software Update and make sure your iPhone is running the latest version of iOS. Outdated iOS versions can cause compatibility problems with VPN apps, and Apple’s updates frequently include fixes for networking bugs that affect VPN connections. If you’re on an older iPhone that’s stuck on iOS 16 or earlier (which is the case for iPhone 8 and older models), your VPN app may not be fully compatible with that version anymore — check your VPN provider’s website to confirm they still support it.

It’s also worth restarting your Wi-Fi router if you’re connected over Wi-Fi. Unplug it from power, wait about 30 seconds, then plug it back in. Router glitches can interfere with VPN handshakes in ways that look like a VPN problem but aren’t, and a fresh restart clears those out.

One more thing to check before you move on: make sure your VPN account is still active and your subscription hasn’t expired. Open the VPN app and look for any alerts about your account status, or try logging in through the VPN provider’s website. If you can’t log in there either, your password may have changed or your plan may need to be renewed. If you’re using a free VPN, check whether you’ve used up your monthly data allowance — most free plans cap you somewhere between 500 MB and a few gigabytes, and once you hit that limit, the VPN stops connecting entirely.

If the preliminary checks don’t help, proceed to the remaining fixes.

2. Toggle Airplane Mode

Open Control Center by swiping down from the top-right corner of your screen (or swiping up from the bottom if your iPhone has a Home button) and tap the airplane icon to turn Airplane Mode on. Wait about 10 seconds, then tap it again to turn it off.

Toggling Airplane Mode kills all wireless radios on your iPhone — Wi-Fi, cellular, Bluetooth — and forces them to reconnect from scratch when you turn it back off. This is different from a restart because it specifically targets the network stack without rebooting the whole device, and it can break your iPhone out of a stuck connection state that’s preventing the VPN tunnel from being established. If your VPN was showing “Connecting…” for a long time without going through, try this before anything more involved.

3. Change Your Connected Region

Changing the region you’re connecting from can fix an issue with your VPN as well. It’s possible your VPN is having issues establishing connections from one region, but not others.

The way to change your connected region varies depending on your VPN provider. A lot of VPN providers allow you to select your location within their iOS app. Try opening the app to see if you can quickly change your connected region.

For example, TunnelBear lets you quickly change your connection region by tapping on an interactive map.

The server you were trying to connect to might be temporarily down for maintenance, or it could be overloaded with too many users at once. This is especially common during peak hours or if your VPN provider has a smaller server network. Try connecting to a server in a completely different country — if that works but your original server doesn’t, the issue is on the server side and there’s nothing wrong with your iPhone.

If your VPN is not connecting to any region, move onto the next step!

4. Delete And Reinstall VPN App

Deleting and reinstalling an app can give it a fresh start if it’s experiencing connectivity issues. One of the app’s files may have become corrupted, which can cause a variety of problems. Press and hold your VPN app’s icon on the Home screen or in the App Library until the menu appears. Tap Remove App > Delete App > Delete to uninstall your VPN app.

Now that the app has been deleted, open the App Store and tap on the Search tab in the lower right-hand corner of the screen. Search for the name of your VPN, then tap the cloud button to the right of the app in the search results.

5. Try Other VPN Apps

If you’re still unable to connect to VPN on your iPhone even after reinstalling the app, there could be a backend or technical issue with your VPN provider. The easiest way to rule out backend issues is to try a different VPN app, preferably one that is more reliable, and connect to one of its servers.

If the connection is successful, then your primary VPN provider may be the culprit. While you wait for your VPN provider to resolve the issue, you can continue using the other app.

However, if you can’t connect to a VPN from the other app as well, there may be an issue with the VPN configuration or your iPhone’s settings. So, apply the remaining fixes.

6. Delete the VPN Profile

A VPN profile enables a device to connect to a private network securely. When you connect to a new VPN for the first time, the app asks for permission to create a new VPN profile. When you grant permission, the app creates a profile, which allows the VPN to monitor or filter your iPhone’s network activity.

The corruption of VPN profiles can also hinder your connection. Therefore, you should delete the existing profile and add it again to rule out this possibility. Here’s how you can do it:

1. Open your iPhone’s Settings app.
2. Go to General > VPN & Device Management.
3. Tap on VPN.
4. Locate the VPN profile associated with your primary VPN, which isn’t connecting.
5. Tap the Info (i) button next to the relevant VPN profile.
6. Tap Delete VPN and then tap Delete in the confirmation popup.
7. When you reopen the VPN app, it will ask for permission to recreate the VPN profile. Grant access and see if it fixes the problem.

If deleting and re-creating your primary VPN profile doesn’t resolve the issue, delete all other VPN profiles you see in the VPN settings menu other than the one you just created. This may resolve the problem.

If you recently upgraded to a new iPhone and restored from a backup, old VPN profiles from your previous device can carry over and cause problems — even if the VPN app itself wasn’t transferred. Go to Settings > General > VPN & Device Management > VPN and delete any profiles you don’t recognize. This has been a common issue for people setting up a new iPhone, and removing those leftover configurations can restore your connection immediately.

7. Disable Connect On Demand

Go to Settings > General > VPN & Device Management > VPN, tap the info button (i) next to your VPN profile, and check whether Connect On Demand is toggled on. If it is, turn it off.

Connect On Demand tells your iPhone to automatically establish a VPN connection whenever it detects certain network conditions, and it sounds convenient in theory. In practice, though, it can create a loop where the VPN keeps trying to connect, failing, disconnecting, and trying again — which is that maddening “VPN cycling on and off” behavior you’ll see in the status bar. Some VPN apps also have their own version of this setting (it might be called “Auto-Connect” or “Always-On VPN” inside the app), so check the app’s settings too. Turning off these automatic reconnection features lets you connect manually and gives you a much clearer picture of whether the VPN can actually establish a stable tunnel.

8. Change the VPN Protocol

A VPN protocol consists of rules that determine the encryption used for data and the way information travels between your iPhone and a VPN server. Almost all VPN providers offer multiple VPN protocols and are configured to automatically connect to the most appropriate one based on the use case. The default auto mode is generally the best, but it sometimes malfunctions and causes connection problems. If you’ve also been using the default auto settings, manually switch between available protocols. Depending on your VPN provider, you may need to dig into the app’s settings to change the protocol.

Common protocols you’ll see include WireGuard, IKEv2, and OpenVPN. WireGuard tends to be the fastest, IKEv2 is good at reconnecting quickly when you switch between Wi-Fi and cellular, and OpenVPN is the most widely compatible but can be slower. If one protocol won’t connect on your current network (which happens a lot on public Wi-Fi at hotels, airports, and offices where certain protocols are blocked), try a different one — your VPN may connect on IKEv2 even though WireGuard was being blocked.

If manually changing the protocol doesn’t resolve the issue, revert the change and switch to auto again.

9. Turn Off Private Wi-Fi Address

Go to Settings > Wi-Fi and tap the info button (i) next to the name of the Wi-Fi network you’re connected to. Tap Private Wi-Fi Address and select Off.

Your iPhone rotates its Wi-Fi MAC address periodically for privacy, which is a good feature in most situations. But some routers and network configurations don’t handle the rotating address well, and the VPN handshake can fail when the address changes mid-connection. Turning this off pins your iPhone to a single MAC address on that network. It’s a small privacy trade-off on one network, but it can fix VPN issues that nothing else seems to touch. If this solves the problem, you can leave it off for your home network and keep it on for networks you don’t trust.

10. Reset Your iPhone’s Network Settings

Open Settings and tap General > Transfer or Reset iPhone > Reset > Reset Network Settings. Enter your iPhone passcode, then tap Reset Network Settings to confirm the reset. Your iPhone will shut down, reset, then turn on again. Reconnect to the VPN again to see if you can connect successfully this time.

Reset Network Settings erases all VPN, Wi-Fi, Cellular, and APN settings on your iPhone and restores them to factory defaults. You’ll have to reconfigure your VPN once after the reset is complete. It’s also a good idea to write down your Wi-Fi passwords before performing this reset, as you’ll have to reenter them.

11. Ensure Your ISP Isn’t Blocking Your Connection

Although it rarely happens, restrictions imposed by your ISP can also prevent your iPhone from connecting to the VPN. If resetting the network settings does not work, you need to rule out this possibility. To do that, connect to your cellular network or a different Wi-Fi network to see if changing the internet provider fixes the issue.

If you find that your ISP is the culprit, you may need to try a different VPN app to see if that’s blocked as well. You can also contact your ISP directly to have them look into the issue or switch to a different network provider that doesn’t block VPNs altogether.

This can also happen on Wi-Fi networks at schools, offices, libraries, and hotels, where the network administrator may have specifically blocked VPN traffic. If your VPN connects fine on cellular data but won’t connect on a particular Wi-Fi network, that network is likely the problem — and there may not be anything you can do about it except use a different connection.

12. Contact Your VPN Provider

If you still can’t connect to VPN on your iPhone, it’s time to contact customer support. There may be an issue with your account only a customer support representative can resolve. Go to Google and search the name of your VPN provider and “customer support” to find their contact information.

Before you reach out, make a note of what you’ve already tried — which troubleshooting steps you went through, what iOS version you’re running (you can find this in Settings > General > About), and your iPhone model. Having that information ready saves time and helps the support team skip the basics and get to the real issue faster.

Get Your VPN Up and Running Again

Having trouble connecting to a VPN can be frustrating. Hopefully, you now understand why your iPhone fails to connect to a remote VPN server and how you can fix it using the troubleshooting steps above. Leave a comment down below if you have any other questions about virtual private networks.

If you’ve worked through every step here and the VPN still won’t connect, there’s a chance you’re dealing with a deeper iOS issue rather than a VPN-specific one. You could try backing up your iPhone and performing a full factory reset through Settings > General > Transfer or Reset iPhone > Erase All Content and Settings, then setting it up as new (without restoring a backup) to test the VPN on a clean install. If the VPN works on a fresh setup, the problem was buried somewhere in your settings or configuration files. If it still doesn’t work, reach out to Apple Support directly — they can run diagnostics and check whether there’s a hardware-level networking issue with your iPhone.

The post iPhone not connecting to VPN? Here’s the fix. appeared first on nerdsmodo.

The iPhone is one of the best smartphones out there, but even the best smartphones can experience hardware and software glitches from time to time. One common issue is when the iPhone touch screen stops working or becomes unresponsive to touch. It’s obvious when this happens, you’ll touch the screen and nothing happens, swipes will be ignored, taps don’t do anything, and other touch on the screen doesn’t register any behavior. It’s clearly annoying if the iPhone screen is no longer working and not responding to touch, and it’s not subtle. In this article, I will explain why the iPhone screen is not responding to touch and how to fix the problem.

Why is my iPhone screen not responding to touch?

Your iPhone screen may not be responding to touch due to several reasons. Sometimes it’s due to a software bug, crud on the screen, damage to the iPhone touch screen or iPhone itself, or perhaps some other issues as well. Read on to learn more.

An overheating iPhone can also cause the touch screen to stop responding — this is actually more common than most people realize, and it can happen after extended gaming sessions, long stretches of GPS navigation in direct sunlight, or even while wirelessly charging in a warm room. If you’ve recently updated iOS and the touch screen started acting up shortly after, a software bug introduced by the update could be at fault as well. Apple Community forums have been full of reports from users whose touchscreens became unresponsive or erratic right after major iOS updates (iOS 18 in particular was a repeat offender), so you’re definitely not alone if that’s what happened to you.

We’ve got several steps to troubleshooting an unresponsive touch screen on an iPhone. If your iPhone is not responding well to touch and the screen seemingly is not working as well as it should with touch input, follow along and you should be able to fix the issue for good. I just experienced this problem on my iPhone, so this is the set of steps I used to troubleshoot the issue, for my specific situation the iPhone just needed to be hard rebooted and some storage freed up for the touch screen to work as expected again.

How to Fix an Unresponsive iPhone Screen

Try these troubleshooting tips one by one. Hopefully, one of these will resolve the issue. If not, it’s likely you have a hardware problem that may only be fixable by contacting Apple customer service to repair or replace your phone.

Clean Your Screen, And Your Fingers

The first thing you need to do when your iPhone screen is not responding to touch is to clean off your screen, and your fingers. If you have a case or a thick third party screen protector on the iPhone, you’ll want to remove those as you troubleshoot this as well.

Give your iPhone screen a good look in bright direct lighting and tilt it around a bit to reveal any obvious gunk, oil, residues, liquids, moistures, dried crust or food, or anything else that may be interfering in the screen. In the sunnier weather, sunscreen is another common thing that can get on a screen and make the iPhone touch screen unresponsive or erroneously responsive. You’ll want to make sure the iPhone screen is clean and clear of anything that can interfere with the ability to detect touch properly. Wiping it down with a soft cotton cloth is often sufficient to remove anything from the iPhone displays touch screen, but you may need to use a slightly damp (and I do mean slightly, never enough moisture to drip) cloth to wipe the screen free.

As for your fingers, just make sure they’re clean and dry. Wash your hands or your fingers if in doubt and if you have a bunch of gunk on them. Unusually dry skin or callouses generally don’t matter and should not cause any issue with the touch screen, though if your hands are wet that may cause issues.

Just make sure the screen is clean, and that your hands are clean and dry.

Force your iPhone to restart

Often times simply restarting the iPhone will fix the unresponsive touch screen. Unfortunately, if your iPhone screen is not responding to touch at all, you won’t be able to move the power-off slider to shut down your device. In this case, you’ll need to resort to a forced restart, which is basically like rebooting your iPhone without powering it down first.

When your iPhone boots back up, the touch screen should work just fine again if it’s a simple software issue like a bug or a software freeze with iOS or an app. The exact steps to force restart your iPhone will depend on what model you have.

Quick tip: The button we call the Power button is also sometimes called the Lock button or the Side button.

If you have an iPhone 8, iPhone SE (2nd and 3rd generations), iPhone X, iPhone 11, iPhone 12, iPhone 13, iPhone 14, iPhone 15, iPhone 16, iPhone 17, or iPhone Air

1. Press and release the Volume Up button.
2. Press and release the Volume Down button.
3. Press and hold the Side button (the Sleep button).
4. Wait until you see the Apple logo, and then release the button.

If you have an iPhone 7

1. Press and hold the Volume Down and Side (Sleep) buttons at the same time.
2. Hold the buttons until the Apple logo appears, then release the buttons.

If you have an iPhone 6s, iPhone SE (1st generation), or earlier

1. Press and hold the Home and Side (Sleep) buttons at the same time.
2. Hold the buttons until the Apple logo appears, then release the buttons.

Disconnect any accessories from the Charging Port

On rare occasions, an accessory plugged into the phone’s charging port could interfere with the touchscreen. If anything is plugged into the port — including a microphone, power bank or charger — unplug it. If that solves your problem, the accessory or cable might be incompatible with your iPhone.

If you notice the touchscreen only acts up while the iPhone is plugged in and charging, the charger itself could be the problem. Non-certified third-party chargers can interfere with the screen’s touch sensitivity, and I’ve seen this happen more than once with cheap gas station cables. Try a different charger — ideally the one that came with the iPhone or an Apple-certified cable — and see if the issue goes away.

Let Your iPhone Cool Down

If your iPhone feels warm or hot to the touch, turn it off and let it sit for 15 to 30 minutes before trying to use the touchscreen again. Apple rates iPhones to work between 32°F and 95°F (0°C and 35°C), and when the internal temperature climbs too high, the touchscreen can stop responding entirely.

This can happen after extended use of GPS navigation in direct sunlight, long gaming sessions, or even wireless charging in a hot room — and sometimes the phone doesn’t even feel that hot on the outside when the internals are already struggling. If you have a thick case on the iPhone, take it off while the phone cools down, since cases trap heat. Don’t stick your iPhone in the fridge or hold it up to an air conditioner to speed things up (which is a lot more tempting than it should be), because the sudden temperature change can cause condensation inside the device and create a whole different set of problems.

Delete and Update / Reinstall the Problematic App

Sometimes an iPhone touch screen is unresponsive in just one particular app. If this is the case, the problem is likely that app and not the iPhone touch screen at all, but since the app is open at the time the app stops responding as it “freezes”. A frozen app will often not respond to any touch screen input at all, but swiping up from the bottom of the screen will often exit the app and go back to the Home Screen in these scenarios.

If your iPhone touch screen stops working while using a specific app, you’ll want to update it first. Open the App Store, tap your profile in the top-right and check to see if an update is available for the app in question, if an update is available, tap the Update button next to the app in question.

If there is still a problem with the touch screen not working in a specific app after you have updated that app, you can also delete the app, and then reinstall the problematic app. Relaunch it again to see if it works as expected. If it still fails, the app could have a bug that needs to be addressed. If the touch screen works with every other app except for the problematic one, that particular app is likely the problem and it’s probably nothing to do with the screen or iPhone at all.

One thing worth knowing: some video playback apps (like certain streaming players) have a screen lock feature that’s designed to prevent accidental touches during playback. If you’re watching a video and the screen stops responding, look for a small lock icon on the screen before assuming the touchscreen itself is broken — tapping that icon should unlock the screen controls.

Free up iOS Storage

Make sure your iPhone has enough storage available. You can check this by going to Settings > General > iPhone Storage. Aim to have at least a 1GB, as iOS really starts underperforming with less space available.

When an iPhone has zero storage available, the device tend to misbehave, and that can include experiencing an unresponsive touch screen.

Deleting unused apps is an easy way to recover some storage space.

I have noticed this is particularly true with modern versions of iOS when an iPhone is totally full and has 0 bytes of storage remaining, in which case many apps become unresponsive as does the touch screen. Sometimes even the buttons along with the touch screen may be unresponsive and not work at all for a while on a totally full iPhone, until whatever software cache clearing mechanisms complete. This is often easily reproducible too; just fill up an iPhone so that it has zero bytes remaining, and then start trying to use apps that rely on a lot of caching like Instagram, X, Facebook, Spotify, etc, once those app caches build up you will likely notice the touch screen becomes unresponsive for short periods of time as iOS struggles to deal with having zero storage available. In such a case, just free up some space, then reboot the iPhone, it should work again.

Check for a Software Update

If your iPhone touchscreen is working well enough that you can get into Settings, go to Settings > General > Software Update and install any update that’s available. Apple regularly releases iOS updates that fix bugs affecting touchscreen performance, and there have been several iOS versions over the years where a touchscreen bug was introduced and then patched in a follow-up update.

If the screen is too unresponsive to get through Settings, skip this step for now — the “Reinstall iOS” step further down covers how to update from a computer using Recovery Mode instead. But if you can get into Settings even intermittently (and some touchscreen issues do come and go), it’s worth trying the over-the-air update first since it’s much less disruptive than connecting to a computer and going through Recovery Mode.

Reset All Settings

Go to Settings > General > Transfer or Reset iPhone, then tap Reset and choose Reset All Settings. This resets all of your system settings — Wi-Fi passwords, Bluetooth connections, display brightness preferences, notification settings — back to their factory defaults, but it does not erase any of your apps, photos, messages, or other data.

Sometimes a corrupted system setting or a bad configuration left over from an iOS update can interfere with the touchscreen, and resetting all settings clears that out without the hassle of wiping the entire phone. You’ll have to re-enter your Wi-Fi password and reconnect your Bluetooth devices afterward, which is a bit of a pain, but it’s a lot less disruptive than a full restore. If you can’t get into Settings at all because the touch screen is completely unresponsive, skip this step and move on to reinstalling iOS via your computer.

Reinstall iOS

As a last resort before contacting Apple Support, you can try updating or restoring iOS. This is a good option if your iPhone successfully restarts but can’t get past the Apple logo.

Even if your iPhone screen is not responding to touch, you can update or restore iOS by connecting your device to your computer and using Recovery Mode:

1. Connect your iPhone to your computer with a USB cable.
2. Open the Finder on your Mac, or open the Apple Devices app on your PC. If your PC doesn’t have the Apple Devices app, or your Mac is using macOS Mojave or earlier, open iTunes instead.
3. Put your iPhone in recovery mode following these steps:
   • iPhone 8 or later, including iPhone SE (2nd generation and later): Press and release the volume up button, press and release the volume down button, then press and hold the side button. Hold down the side button until you see the Connect to computer screen.
   • iPhone 7 or iPhone 7 Plus: Press and hold the volume down button and Sleep/Wake button at the same time. Hold down the buttons until you see the Connect to computer screen.
   • iPhone 6s or earlier, including iPhone SE (1st generation): Press and hold the Sleep/Wake button and Home button at the same time. Hold down the buttons until you see the Connect to computer screen.
4. When you see the option to restore or update your iPhone on your computer, choose Update. iTunes or Finder will update the phone without deleting your apps and data. Do not choose Restore, which will erase all of your data.
5. If the Update doesn’t work, your final option is to choose Restore. This option will restore your iPhone to its factory settings.

Important: If you choose Restore, iOS will be reinstalled and all of your data will be erased. You will, however, have an opportunity to restore a backup from iCloud. For this reason, it’s important to back up your data.

If your screen is completely unresponsive but the iPhone is otherwise working (you can hear sounds, receive calls, etc.), you may still be able to back up your data before restoring. Connect the iPhone to a Mac or PC with a USB cable, open Finder or the Apple Devices app, and look for the option to back up. If the iPhone has been connected to that computer before and already trusts it, the backup should start without needing you to tap anything on the screen.

Is the iPhone Touch Screen Cracked? Is the iPhone Touch Screen Damaged? Was the iPhone damaged or dropped?

This is probably obvious from the get-go, but if the iPhone touch screen is cracked it can become unresponsive, partially unresponsive, or just not work at all. Likewise if the iPhone is damaged, it may not work at all, or the touch screen may not work reliably.

Water damage can also ruin an iPhone touch screen, or the entire phone as well. If an iPhone has been dropped, it’s also possible that internal components came loose, which may cause the touch screen to not be working.

If your iPhone has obvious visible damage and the iPhone touch screen is not working, the damage is likely to be the cause. In such a situation, take the iPhone to an authorized Apple repair center or an Apple store and have them give it a look.

If you’ve had your iPhone screen replaced by a third-party repair shop in the past, that could be causing the problem too. Non-genuine replacement screens vary a lot in quality, and touchscreen issues are one of the most common complaints with cheap aftermarket parts. The screen might work fine for weeks or months and then start losing touch sensitivity or developing dead zones. If that sounds like your situation, you may need to have the screen replaced again with a higher-quality part — or take it to Apple or an Apple Authorized Service Provider for an OEM display.

See also: Apps Not Downloading on iPhone? Here’s The Fix (11 Ways)

iPhone touch screen STILL not working? Contact Professional Help

If all above troubleshooting methods have failed, it’s time to contact Apple support, go to an Apple Store, or visit an Apple authorized repair center. Have them inspect your iPhone touch screen to figure out what’s wrong with it, it may need a repair. It may be a hardware problem that is unseen, or it could be some other issue that you overlooked.

When you go in for service, Apple can run a full diagnostic on the iPhone to check for hardware faults that you’d have no way of detecting at home — things like a failing digitizer, a loose internal display cable, or damage to the logic board. If your iPhone is still under warranty or covered by AppleCare+, the repair may be covered at no cost or for a reduced service fee. Bring your proof of purchase if you have it, and make sure to mention every troubleshooting step you’ve already tried so they don’t waste your time repeating the same fixes.

–

Did these troubleshooting tips fix your iPhone touch screen issue? Do you have any tips or tricks to resolving problems with an unresponsive or non-working touch screen on iPhone? Let us know in the comments below.

The post iPhone screen not responding to touch? Here’s the fix appeared first on nerdsmodo.

How to fix apps not downloading on iPhone

1. Test Your Internet Connection

The first thing you should do if apps are not downloading on your iPhone is to make sure that you are connected to the internet. Most of the time, you should connect to Wi-Fi, since cellular downloads use up your data allowance and often only let you download apps smaller than 200MB. Go to settings > Wi-Fi and make sure that you are connected to a working Wi-Fi network.

After connecting to Wi-Fi, test your internet connection by streaming a video on YouTube. If the connection is slow or unstable, toggle Wi-Fi off and back on from the Control Center. You can access this by swiping down from the top-right corner of your iPhone screen.

Problems with Wi-Fi can be caused by temporary service outages or local network hardware failure. You might want to power cycle your router and modem (waiting around 10 seconds between switching devices off and then on again) to rule out local network problems as a cause.

See also: iPhone not connecting to Wi-Fi? Here’s how to fix it

If you need to use mobile data to download apps instead, make sure you allow the App Store to use cellular data on your iPhone. Go to Settings > Cellular. Scroll down to the list of apps and turn on App Store.
Then go to Settings > Apps > App Store, tap App Downloads and choose if you want your iPhone to ask permission before downloading apps over 200MB in size.

See also: iPhone Cellular Data Not Working? Here’s the Fix (8 Ways)

2. Disable Your VPN

The easiest way to rule out your VPN as a cause is to disable it and try again. To do this, open your VPN provider’s app and disconnect. You can also try switching servers, to see if the problem is caused by your configuration. Once you disable VPN, open the App Store and try downloading apps again.

VPNs are useful and almost certainly worth paying for, but they can cause all sorts of problems too. This could be a temporary problem with your chosen VPN provider or local server, but it could also be so-called "suspicious" activity that Apple has chosen to block. Sometimes, VPN providers that offer a kill switch to disable all internet traffic when the connection drops. Don’t forget to enable your VPN again when you’re done troubleshooting.

3. Make Sure Your Have Enough Free Space

Go to Settings > General > iPhone Storage to see how much free space you have and take a look at which apps are using the most. There are plenty of ways to create more free space on your iPhone if you need to, such as offloading apps, uploading photos to the cloud, or deleting junk that you no longer need. You can do all of this from the iPhone storage settings.

Internal iPhone storage is not expandable. You can’t download new apps on your iPhone if you’ve already filled up your device with photos, videos, music, and other content.

When this happens, an alert should pop up saying "Not Enough Storage."

4. Add a payment method on your iPhone

You might need to have a valid payment method on file, even if the app that you want to download is free.

1. Open the Settings app on your iPhone.
2. Tap your name.
3. Tap Payment & Shipping. You might be asked to sign in with your Apple Account.
4. Tap Add Payment Method.
5. Enter the payment method details, then tap Done.

If you’ve already added a payment method, it’s possible that the payment details on your account expired, so you should check if you need to update them.

5. Make Sure the Date and Time Are Set Correctly

You may encounter problems downloading apps on your iPhone if the date and time aren’t set correctly for your time zone. An easy fix to this is to set the date and time automatically by going to Settings > General > Date & Time.

6. Turn Off Content and Privacy Restrictions

The content and privacy restrictions on an iPhone let you limit settings, apps, or features to keep the device safe for children. However, those same limitations explain why you can’t download new apps on your iPhone.

To edit your restrictions:

1. Go to Settings > Screen Time > Content & Privacy Restrictions.
2. If prompted, enter your Screen Time passcode, which may be different from the standard passcode you use to unlock your iPhone.
3. Turn off all Content & Privacy Restrictions at the top of the screen or change the following setting:
   • Tap iTunes & App Store Purchases > Installing Apps.
   • Select Allow to enable installing apps.

7. Pause and Resume Your App Download

Sometimes, if your iPhone won’t download apps, all you need to do to fix it is pause the download, then resume it again. You can do this from the Home Screen on your device. While an app is downloading, it should appear on the Home screen as a darkened app icon with a progress circle in the middle. Tap it to pause the download—causing a pause symbol to appear. Wait a few seconds, then tap it again to resume the download.

Alternatively, tap and hold on the app icon to reveal a quick-action menu. You can choose to Pause Download or Resume Download from this menu as well.

Alternatively, you have the option to Prioritize Download from the quick-action menu. This is a good idea if your iPhone is downloading other content as well, since it prioritizes this app above all other downloads.

8. Sign Out of the App Store, Then Sign In Again

Though problems downloading apps on your iPhone is likely a connectivity issue, signing out of App Store and then in again is also worth a shot. You can do this under Settings > [Your Name] > Media & Purchases by tapping the "Sign Out" button. This will sign you out of the App Store while leaving your main Apple account signed in.

You can then sign in and attempt to access the App Store again, using the same menu.

9. Restart Your iPhone

A quick restart can resolve any temporary glitches that may be preventing your iPhone from downloading apps. You can restart your iPhone by asking Siri to "restart my iPhone" which will power down and then power up your device.

Alternatively, press and hold the Side button with either Volume button. When prompted, slide to power off your iPhone.

Wait 30 seconds after it powers off before pressing the Side button again to restart it.

10. Delete the App, Then Download It Again

Sometimes a download becomes so corrupted that the only way to fix it is deleting the half-downloaded app and downloading it again from scratch. If you never used the app before, there’s nothing to lose from doing this.

However, if you were trying to update an app rather than download it for the first time, deleting it might also delete any data you have saved in the app. You should make a backup of your iPhone before deleting apps to protect your data.

1. Tap and hold the app icon on the Home Screen. In the quick-action menu that appears, tap Remove App, tap Delete App, then tap Delete to confirm.
2. Go to the App Store and redownload the app.

11. Consider Resetting Network Settings

If you’ve tried everything and you still can’t update apps on your iPhone, consider resetting your network settings. Doing this will restore settings like DNS and proxy configurations to factory defaults, and you’ll also lose all of your saved Wi-Fi credentials for any wireless networks you have added to your device. To do this, head to Settings > General > Transfer or Reset iPhone > Reset and pick "Reset Network Settings" from the list of options that appear. Confirm your choice and wait for the reset to complete.

The first thing you’ll probably want to do is head to Settings > Wi-Fi and connect to your local wireless network. You can then try downloading apps again.

Conclusion

By now, you should be able to download as many apps as you want. If your iPhone still won’t download apps from the App Store, contact Apple Support for more help.

The post Apps Not Downloading on iPhone? Here’s The Fix (11 Ways) appeared first on nerdsmodo.

There are few sadder phrases than those two little red words your iPhone displays when a message fails to send: “Not Delivered.” Those words, along with that exclamation point in a circle, mean your charming photo or witty comment didn’t go through.

Fortunately, as in life, with the iPhone: the simplest answer is usually the correct one. If your iPhone is not sending messages, first make sure you have a connection to either a Wi-Fi or cellular network, and make sure your phone is not set to Airplane Mode.

How to troubleshoot your iPhone if it isn’t sending messages

Try these fixes to get your iPhone messages sending smoothly again.

But, first, of course, try just tapping that red exclamation point beside your failed message and then tap “Try Again.”

Check your network connection

If your iPhone is not sending messages, first make sure your phone has service, as the issue may be with the Wi-Fi or cellular network, not your device itself. SMS and MMS messages send in green iPhone text bubbles, while iMessages send in blue iPhone text bubbles. To send a message as iMessage, RCS, or MMS, you need a cellular data or Wi-Fi connection. To send an SMS message, you need cellular network connection. Be sure you are sending the right type of message.

Sometimes bad weather, internet hackers, or a rural location can affect your service connection. One simple way to check if your cell signal is bad is by looking at the number of network bars in the top-right of your iPhone’s status bar, next to the battery icon. Less filled bars mean poor connection. If you see “Searching,” “No Service,” or “SOS,” that means you don’t have a signal.

Try moving to an area with better reception if it’s weak or nonexistent. If you’re in an area that usually has a good signal, contact your mobile network operator.

Before you start changing any settings, check Apple’s System Status page at apple.com/support/systemstatus to make sure iMessage itself isn’t down. If you see anything other than a green dot next to iMessage on that page, the problem is on Apple’s end and there’s nothing you can fix on your device — you’ll just have to wait it out.

Make sure you are not in Airplane Mode

If you can’t send any message on your iPhone, make sure airplane mode is turned off. You can do this by opening your iPhone’s Control Center and tapping the Airplane toggle in the top left. This symbol is grayed out whenever Airplane Mode is off. As a bonus, sometimes toggling Airplane Mode on and off can clear up temporary signal hiccups, too.

Airplane Mode prevents your iPhone from sending and receiving cellular signals. Unless you’re connected to a Wi-Fi network, you won’t be able to send or receive text messages via iMessage when you enable Airplane mode.

And even then, you can’t send or receive SMS and MMS messages since they rely on cellular signals. Because of this, you should make sure that you’ve turned off Airplane Mode before trying to send text messages.

Check your iPhone’s Messages settings

In the Settings app, tap Apps. Tap Messages, then make sure the switches next to iMessage is toggled on (to green). Next, scroll down and make sure Retry as Text Message is also toggled on.

When you message another contact with an Apple device, your iPhone sends it via iMessage by default.

Because iMessage texts sometimes fail to send, your iPhone might instead try sending SMS (Short Message Service) messages, even to other iPhone users. However, you need to switch this feature on in Settings for it to work.

Now, if you try to send a message and you see a red exclamation point with an alert that says Not Delivered, tap the red exclamation point, then tap Send as Text Message.

If you don’t see an option to turn on Retry as Text Message on your iPhone, then your carrier might not support this feature.

If your iPhone won’t send picture messages, make sure the switch next to MMS Messaging is turned on (to green).

While you’re in the Messages settings, tap Send & Receive and make sure your phone number has a checkmark next to it under “You can receive iMessages to.” If your phone number isn’t listed or isn’t checked, your iPhone may be trying to send iMessages through an email address instead, and that mismatch can cause messages to fail without any clear reason why.

Toggle iMessage Off and On

If your iPhone can’t send iMessages, go to Settings > Apps > Messages and tap the iMessage toggle to turn it off. After about 30 seconds, turn it back on.

Toggling iMessage off and on forces your iPhone to re-register with Apple’s messaging servers, which can clear out a stuck activation or a connection that went stale after a software update (this happens more often than you’d think, especially after major iOS upgrades). If that alone doesn’t fix the problem, try signing out of your Apple account— tap Send & Receive, tap your Apple account at the bottom, and choose Sign Out. Give it a few seconds. Then sign back in and send a test message to see if things are working.

Make sure your Mobile Plan is active

If your iPhone won’t send text messages, you should check whether you currently have an active mobile service plan. If you don’t have one, you won’t be able to send texts. If you’re not sure how to do this, contact your carrier.

While the vast majority of phone plans offer standard unlimited texting, you might have exceeded your monthly limit of text messages if you have a limited plan.

In either case, you should contact your network provider to ensure there are no issues with your account services.

Make sure you are texting the correct phone number

Sending text messages to inactive or unused numbers is a recipe for failure and frustration. Make sure that you entered the correct phone number. If you entered the phone number wrong or the intended recipient now has a new phone number, you may be prevented from sending the text. So take your time when entering phone numbers.

If you continue to have trouble, contact your intended recipient by other means to confirm the phone number.

This last point is important. Sometimes, your contacts may change their phone numbers, or their mobile operator may disconnect them. The issue may be with someone else’s phone and not yours.

Restart the Messages app

If your iPhone still can’t send text messages, try closing the Messages app and opening it again. Swipe up from the bottom of the screen to open the app switcher. Find the Messages app and swipe up on it. Reopen the Messages app and check if you can send messages again. Sometimes applications get lost or stuck trying to perform a certain action—like sending a text. Often, refreshing the app can clear out the action, allowing the app to once again function properly.

If one specific conversation keeps failing, try deleting that thread and starting a brand new message to the same contact. A conversation can get corrupted when a message has been stuck trying to send for a long time, and deleting it gives the Messages app a clean slate.

Restart your iPhone

To restart your iPhone, hold down the power button on the right side and one of the volume buttons on the left side. When the power slider appears, drag it to power down. When you turn it back on, it may well be able to send messages again.

Turning an iPhone on and off clears temporary memory, so it can be a good way of removing any issues affecting how your iPhone works.

Check Your Date and Time Settings

Go to Settings > General > Date & Time and make sure Set Automatically is turned on.

If your iPhone’s date and time are even slightly off — and it doesn’t take much, even a few minutes can do it — iMessage can fail to connect to Apple’s servers because the security certificates behind the connection rely on accurate timestamps. It sounds strange, but it’s true. After a factory restore, a long international trip, or even a dead battery that sat uncharged for weeks, this setting can get thrown off without you realizing it. If Set Automatically was already turned on and the time still looks wrong, try toggling it off, waiting about ten seconds, and then turning it back on to force your iPhone to pull a fresh timestamp from the network.

Update iOS

Make sure your iPhone is connected to a Wi-Fi network, then go to Settings > General > Software Update. If a pending update is available, you’ll see an Update Now button — tap it to download and install the latest version on your iPhone.

You should always keep your iPhone updated with the latest version of iOS. New updates for iOS can iron out software issues and bugs. So if you still can’t send messages on your iPhone, update your device to the latest version of iOS.

If your iPhone says, “iOS is up to date,” you have the latest version installed and don’t need to do anything else.

Update Your Carrier Settings

Make sure your iPhone is connected to Wi-Fi or cellular data then go to Settings > General > About and wait about 15 seconds. If a carrier settings update is available, a pop-up will appear asking you to install it — tap Update.

Apple and your wireless carrier release these small updates periodically to improve how your iPhone connects to the cellular network, and an outdated carrier bundle can quietly break things like SMS delivery, MMS attachments, or even 5G connectivity. Easy to miss. If no pop-up appears after sitting on the About screen for about 15 seconds (most people have never even opened this screen), your carrier settings are already current and you can move on.

Reset your network settings

Go to Settings > General > Transfer or Reset iPhone, then tap Reset and select Reset Network Settings. This will erase all of your saved Wi-Fi networks and passwords, so save this step for after you’ve tried everything above.

Resetting your network settings is a last-ditch attempt before seeking help from your carrier or Apple, but it might be your last chance for getting those messages out.

Contact your carrier or Apple

If your iPhone still won’t send SMS messages after all this, your last option is to contact your carrier or Apple. First, try checking with your carrier to see if the type of message you’re trying to send, like RCS, MMS, or SMS, is supported. If everything is good on your carrier’s end, it’s likely a hardware issue, and you should contact Apple or an authorized service provider for expert assistance.

When you call your carrier, ask them specifically to do a network reset on their end — this is a different thing from the network settings reset you already did on your iPhone, and it has fixed the problem for a lot of people in Apple Community forums who had tried everything else on their own device. If the carrier says everything looks fine on their side, that points toward a hardware issue with your iPhone’s cellular radio or SIM reader.

Depending on your location, you can book an Apple Store appointment at a Genius Bar. You may have to eventually replace the iPhone, but that should be the last case scenario.

Fix Your iPhone Messaging Issues

Unfortunately, it can take a little bit of time to figure out exactly what the source of your texting issues may be. However, if you’re patient and willing to try a couple of different techniques, you should have no problem getting your iPhone working again.

If you’ve tried every step above and your iPhone still won’t send text messages, have your carrier run a full network reset and then book an appointment at an Apple Store or authorized service provider. A technician can run diagnostics on your iPhone’s hardware — including the antenna and SIM tray — and tell you whether a repair or replacement is needed before you spend any money.

The post iPhone Not Sending Messages? Here’s The Fix (13 Ways) appeared first on nerdsmodo.

Let’s walk through the steps to fix the problem when your iPhone isn’t connecting to Wi-Fi. If your iPhone cellular data is not working, we have a separate troubleshooting guide that you may want to check out.

How to Fix an iPhone Not Connecting to Wi-Fi

1. Check the Wi-Fi Menu on Your iPhone

Open the Settings app on your iPhone and check whether the Wi-Fi network you want to connect to is within range and already connected.

Tap to go back to the main Settings page, then take a look at the Airplane Mode slider. Having airplane mode enabled turns off all wireless communication, so your iPhone won’t connect to Wi-Fi properly when it’s on.

Because of this, toggling airplane mode on and back off can be a useful troubleshooting step when your iPhone won’t connect to Wi-Fi. Try this before proceeding, and make sure airplane mode is off going forward.

Next, tap the Wi-Fi entry in Settings. Make sure the Wi-Fi slider at the top is green, which means the feature is enabled. Below this, when everything is working, you’ll see the name of your network with a checkmark next to it, showing that you’re connected.

If this doesn’t appear, tap the name of the network you want to connect to in the Other Networks list below to connect to it. If you don’t see the network here, make sure that you are within range of the Wi-Fi network.

The exact distance that Wi-Fi covers will vary based on your equipment, but you should be as close to your router as possible to ensure a strong signal. If you know you’re close and still don’t see your Wi-Fi network, or it doesn’t connect when you tap it, you’ll need to continue to additional troubleshooting.

2. Reboot Your iPhone and Wi-Fi Router

Restart your iPhone, as well as your Wi-Fi router, to get rid of any simple issues before you continue. To reboot your iPhone, go to Settings ⇒ General ⇒ Shut Down, then drag the power slider.

If your Wi-Fi router has a physical power button, power it off, wait about a minute, then power it back on. If your Wi-Fi router doesn’t have a power button, unplug the power cord from the power outlet, wait about a minute, then plug it back in.

Once the Wi-Fi router has rebooted, go back to Settings ⇒ Wi-Fi and tap your network name again. In case it doesn’t connect, we’ll walk you through the next steps.

If you still don’t see the name of your network on the menu, and it’s your home network, make sure that your network isn’t hidden. Also, confirm all your equipment is plugged in and the lights on your modem and router aren’t flashing red or similar. If you’re trying to connect to a public network that won’t appear, speak to its administrator.

3. Forget and Add the Network Again

If hitting the network name on the Wi-Fi menu doesn’t connect properly, tap the blue i icon next to your network’s name. On the resulting menu, tap Forget This Network, then hit Forget to confirm. This will clear the saved Wi-Fi password and require you to manually add it again.

Back on the Wi-Fi screen, select your network and type in its password. Your iPhone should connect to Wi-Fi with the correct password. But if the password doesn’t work, whoever administers the network might have recently changed it.

For networks where you’re in charge, you can log into your router to view the password and change it, if needed. For networks that aren’t your own, you’ll need to ask the owner to confirm the password. Make sure that you type the password carefully, and don’t confuse characters like “1” and “l”.

In case this step solved your issue, it’s a good idea to enable the Auto-Join slider on the network’s options page. With this on, your iPhone will automatically connect to your Wi-Fi network when within range.

4. Look for a Login Page (for Public Wi-Fi)

Open Safari or another browser and try to visit any website after connecting to a public network. You should be brought to a sign-in page where you’ll need to tap a button to confirm that you agree to the network’s terms of service.

Many of these steps assume that your iPhone won’t connect to Wi-Fi at home. But when you’re trying to get online on a public network, like those at an airport or hotel, there’s often an extra step you have to complete before you can get online.

After you do this, the Wi-Fi network should work properly, though keep in mind that some functions, like games and media streaming, may still be blocked on that network.

5. Check Your Wi-Fi Network for Issues

Even once your iPhone is connected to Wi-Fi, you might still have issues with the network not letting you get online. In Settings ⇒ Wi-Fi, you’ll see a message like “No Internet Connection” underneath your network name when there’s an issue. Tap the network to see more details about the problem.

If an error appears here, it almost certainly affects your whole network, so other devices won’t be able to get online either. Try getting online with another device, like an Android phone or a laptop, to confirm this.

6. Update All Devices

Update your iPhone by going to Settings ⇒ General ⇒ Software Update. While a software update isn’t likely to fix iPhone Wi-Fi issues, it’s worth a try if you’ve reached this point.

Then, update your router. The instructions for doing this vary by device, so try a Google search for your model, or consulting the manual, for help.

7. Try Connecting to Another Wi-Fi Network and Reset Network Settings

Try connecting your iPhone to a different Wi-Fi network to determine where the problem lies. If you’re able to connect successfully at a friend’s house or a coffee shop, then the problem is with your home network. But if your iPhone won’t connect to Wi-Fi anywhere, then something on your device is the problem.

In this case, go to Settings ⇒ General ⇒ Transfer or Reset iPhone ⇒ Reset ⇒ Reset Network Settings. This will set everything network-related on your iPhone, including Wi-Fi, Bluetooth, and any VPNs, back to their default options. It’s a bit of a pain to set everything back up, but it’s the final troubleshooting step to weed out strange problems on your device.

If your iPhone still won’t connect to any Wi-Fi networks after resetting network settings, you should contact Apple Support. Your device likely has a hardware problem.

iPhone Won’t Connect to Wi-Fi? Now You Know the Fix

You don’t have to stress when your iPhone isn’t connecting to Wi-Fi. The problem usually lies with a simple mistake or is network-wide, so there’s probably nothing wrong with your iPhone. By following these simple steps, you can get your device back on Wi-Fi and online again.

There are ways to improve the Wi-Fi performance of your iPhone too, in case you find that it’s not suitable once your device connects.

The post iPhone not connecting to Wi-Fi? Here’s how to fix it appeared first on nerdsmodo.

It’s the mundane problems with technology that are the most frustrating. Your iPhone is on and seemingly connected, for example, but you can’t get data in any apps and you see an error message in Safari that your phone isn’t connected to the internet.

Why is your iPhone cellular data not working? Let’s look at these easy ways to fix your iPhone cellular data problem now.

How to Fix iPhone Cellular Data Not Working

Make Sure You Haven’t Exceeded Your Mobile Data Limit

The first thing you should do if cellular data is not working on your iPhone is to make sure that you haven’t exceeded the allowed data limit. Some carriers allow you to continue using the internet at a fee even after you’ve used up the allowed data, while others forbid internet access.

If this is the cause, you’ll need to reactivate your mobile plan or top up your quota, then you’re good to go! Cellular data should start working on your iPhone immediately. Contact your carrier’s support (AT&T, Verizon, T-Mobile) if you have issues doing so, and consider limiting your data usage in the future to avoid running out again.

Turn Off Your Wi-Fi

Go to Settings > Wi-Fi and tap the Wi-Fi toggle to temporarily disable it. Your iPhone will be forced to switch over to cellular data and use that instead. This worked on both my iPhone 17 Pro and my wife’s iPhone 16.

Sometimes your iPhone can get caught between a Wi-Fi network and cellular, and stick with Wi-Fi even when that’s the wrong choice. If you are outside your home, for example, you might be just outside the practical range of your Wi-Fi network, and your iPhone should switch over to cellular data. But because the phone can still connect to your Wi-Fi network — barely — it stays connected, even though it can’t exchange any data.

Toggle Airplane Mode

Go to Settings and look for the Airplane mode toggle. If it’s
already on, that is probably your problem right there — when
Airplane Mode is turned on, Cellular Data is automatically turned
off on an iPhone. If it’s off, turn it on, wait a few seconds,
and then turn it off.

While there are a lot of reasons cellular data may not be
working on your iPhone, toggling your wireless connection off and
back on again is one quick and easy trick that often gets it
working again.

Toggle Your Mobile Data Setting

Go to Settings and tap Cellular. If Cellular Data is off, tap it to turn it on. Otherwise, tap it to disable, wait a moment, and tap it again to turn it back on.

Disabling and re-enabling mobile data sometimes helps fix minor glitches by giving your phone a fresh chance to re-establish an internet link. It’s also possible that mobile data was accidentally toggled off on your iPhone even if Airplane mode is not enabled. Now test your internet connection and see if that solved your problem.

Check for a Carrier Settings Update

Check for a carrier settings update by going to Settings > General > About. If there’s a carrier update available, you’ll be prompted to install it. Since cellular data is not working on your iPhone, make sure that your device is connected to a working Wi-Fi before checking.

Apple and your wireless carrier release updates in order to help your iPhone connect to your wireless carrier’s network more efficiently. A problem can occur if your cellular provider has recently updated its configuration and the changes failed to update automatically on your phone for some reason.

Reseat Your SIM Card

If your iPhone has a physical SIM card, find the SIM card removal tool that came with your phone — if that’s no longer around, you can also use a thin paper clip. Insert the tool into the hole near the SIM card tray and push gently but firmly until the tray pops out. Make sure the SIM card is seated properly in its tray and then carefully reinsert it.

Reseating the SIM card is not hard to do and can help fix cellular data issues caused by a loose or improperly seated card.

Restart Your iPhone

Go to Settings > General > Shut Down. Drag the Slide to Power off slider from left to right to turn off your iPhone. Wait a few seconds, then press and hold the side button until the Apple logo flashes onto the center of the screen.

If nothing above has worked, restarting your iPhone should clear out any temporary hiccups blocking your mobile data. It only takes a few minutes to shut it off and then turn it back on again. If a regular restart doesn’t work, you may want to force your iPhone to restart. See our guide to learn how to force restart an iPhone.

Reset Your Network Settings

Go to Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings. You may have to enter your passcode to proceed.

Save this troubleshooting step for last, because when you reset your network settings, all saved networks, paired Bluetooth devices and Wi-Fi passwords will be erased, so you’ll need to manually reconnect to all your favorite networks. If Cellular Data still doesn’t work on your iPhone, it could be a result of corruption in your phone’s network settings, which this reset can clear up.

Solved: iPhone Cellular Data Not Working

We’ve seen how to fix the issue of your iPhone mobile data not working. To rule out issues, first check whether you have an active mobile plan with sufficient data left. Also, ensure that your device’s airplane mode is turned off.

If your iPhone still can’t connect, Apple advises you to contact your carrier to see if there are other causes. For example, an outage in your area might cause all connections to fail. In case your carrier responds that there’s no problem with your account or network, you’ll have to reach out to Apple Support to resolve the issue. It may be a problem with your iPhone.

The post iPhone Cellular Data Not Working? Here’s the Fix (8 Ways) appeared first on nerdsmodo.

Turn off iPhone

The quickest way to turn off your iPhone is using the physical buttons on your device. Exactly how to do this varies slightly by model, since certain iPhones include different types of buttons:

• iPhone model with Face ID: Simultaneously press and hold the side button and either volume button until the sliders appear, then drag the Power Off slider towards the right.
• iPhone model with the Home button: Press and hold the side button, then drag the slider towards the right.
• iPhone model with a Home Button and a Top Button: Press and hold the top button, then drag the slider towards the right.

Another way to shut down your iPhone is via Siri. All you need to do is say, "Hey Siri, turn off my iPhone." Siri should respond with a confirmation, asking, "Just to confirm, you want to power off this device?" Then, responding with "Yes" shuts down your iPhone right away.

You can also turn off your iPhone using the Settings app. To do so, go to Settings, tap General, scroll down to find Shut Down, then drag the power off slider to complete the process. This method is particularly useful if your physical buttons aren’t working properly.

Another way to shut down your iPhone if your physical buttons aren’t working properly is by using the power off button in control centre. If you have an iPhone X or later, swipe down from the top right corner of the screen to open the Control Center. If you have an iPhone SE, iPhone 8 or earlier, swipe up from the bottom edge of any screen. Press and hold (then release) the power button for a second. Then, you can simply drag the power slider to turn off your iPhone.

How to fix iPhone not turning off issue

But what if your iPhone doesn’t turn off or the device is frozen and won’t respond to screen inputs? That’s when it’s time to force restart your iPhone.

Fix 1: Force restart your iPhone

If iPhone isn’t responding, and you can’t turn it off, try forcing it to restart.

If you have iPhone X or newer

If you have any model in the iPhone X, iPhone XS, iPhone 11, iPhone 12, iPhone 13, iPhone 14, iPhone 15, iPhone 16, iPhone 17 families (including variations like the iPhone 17 Pro, iPhone 17 Pro Max or iPhone 16 Plus), press and quickly release the volume up button, press and quickly release the volume down button, then press and hold the side button until the Apple logo appears.

If you have iPhone 7 or iPhone 7 Plus

On your iPhone 7 or iPhone 7 Plus, press and hold both the side button and the volume down button at the same time until you see the Apple logo (this might take longer than 10 seconds).

If you have iPhone 6 or earlier

On your iPhone 6s and earlier, press and hold both the Home button and the side button or the top button until you see the Apple logo (this takes around 10 seconds).

Now try turning off your iPhone using any of these methods:

• Simultaneously press and hold the side button and either volume button until the sliders appear, then drag the Power Off slider.
• Go to Settings > General > Shut Down, then drag the slider.
• Swipe down from the top-right of your iPhone and press and hold down on the power button in the top-right of the control center, then drag the slider.

If your iPhone still won’t turn off, use Siri to shut down your device. All you need to do is say, "Hey Siri, turn off my iPhone." Siri should respond with a confirmation, asking, "Just to confirm, you want to power off this device?" Then, replying with yes shuts down your iPhone right away.

Fix 2: Put your iPhone in Recovery Mode

If force restarting didn’t resolve the issue, putting your iPhone in recovery mode lets you update or restore iOS using your computer. The below steps will work with iPhone 8 or later, including iPhone SE (2nd generation and later).

Prepare your computer

Make sure that your Mac is up to date. If you’re using a PC, make sure you have the latest version of the Apple Devices app or iTunes.

Connect your iPhone

Connect your iPhone to your computer with a USB cable, then open the Finder on your Mac, or open the Apple Devices app on your PC. If your PC doesn’t have the Apple Devices app, or your Mac is using macOS Mojave or earlier, open iTunes instead.

Enter Recovery Mode

Keep your iPhone connected and wait until the Connect to computer screen appears. Press and quickly release the volume up button. Press and quickly release the volume down button. Then, press and hold the side button until you see the Connect to computer screen.

Update or Restore your iPhone

Once your iPhone is in recovery mode, select your iPhone from the sidebar in Finder or from the top-left corner in iTunes, then go to the Summary or General tab and click Update or Restore, depending on your needs. Update will install the latest version of iOS without erasing any data. Restore will update iOS while also erasing all the data and resetting your iPhone to factory settings.

Exit Recovery Mode without restoring

If you need to exit recovery mode, but you don’t want to update or restore your iPhone, you should be able to do so by force restarting your iPhone. To do this, disconnect your iPhone from the computer, then quickly press and release the volume up button, then quickly press and release the volume down button, and then press and hold the side button until you see the Apple logo.

And if recovery mode didn’t help solve your software issues, consider using DFU mode with your iPhone instead, which offers a deeper level of software reset for your device.

Fix 3: Put your iPhone in DFU mode

DFU (Device Firmware Update) mode offers a deeper level of software reset than recovery mode. Follow these steps to enter DFU mode on an iPhone 8 or later.

Prepare for DFU mode

Connect your iPhone to your computer with a USB cable and open the Finder on your Mac, or open the Apple Devices app or iTunes on your PC.

Enter DFU mode

Quickly press and release the volume up button, then quickly press and release the volume down button, and then press and hold the side button until the screen goes black. As soon as the screen turns black, press and hold the volume down button while continuing to hold the side button.

Complete the DFU process

After 5 seconds, release the side button while continuing to hold the volume down button until your iPhone shows up in iTunes or Finder. As soon as it appears in iTunes or Finder, release the volume button. Your iPhone is now in DFU mode.

Update or Restore from DFU mode

Once your iPhone is in DFU mode, select your iPhone in Finder or iTunes, go to the Summary or General tab, and click Update or Restore depending on your needs. Update will install the latest version of iOS without erasing any data. Restore will update iOS while also erasing all the data and resetting your iPhone to factory settings.

Exit DFU mode without restoring

If you need to exit DFU mode, but you don’t want to update or restore your iPhone, you should be able to do so by force restarting your iPhone. To do this, disconnect your iPhone from the computer, then do a force restart.

The post My iPhone Won’t Turn Off! Here’s The Fix! appeared first on nerdsmodo.